Switching The Power Off; Switching The Main Power Off - Fuji Xerox DocuPrint CM415 AP User Manual

2 Product Overview
You can also use the Power Saver feature to save power consumption while the machine is
not in use.
For information on the Power Saver feature, refer to "Power Saver Mode" (P.66).
Important • If the power is switched off, all the services of the machine will stop. When using the machine
1
Press the push-button power switch to switch
the power on.
Note
2

Switching the Power Off

The following describes how to switch the power off.
Important • If the power is switched off, all the services of the machine will stop. When using the machine
Note
1
Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the data being
2
Press the push-button power switch.
Important • Power off processing is performed internally
Note

Switching the Main Power Off

The following describes how to switch the main power off.
Important • Do not switch the main power off when a screen is displayed on the touch screen or while the
64
throughout the day for jobs such as receiving fax, do not switch the power off.
• The "Please wait..." message indicates that
the machine is warming up. The machine is
not available during warming up.
• If the machine does not power on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
throughout the day for jobs such as receiving fax, do not switch the power off.
• You can set the machine to be switched off automatically at the same time every day. For more
information, refer to "5 Tools" > "Common Service Settings" > "Power Saver Settings" >"Scheduled
Power Off" in the Administrator Guide.
processed may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
• When powering the machine on after it has
been switched off, wait 15 seconds after the
touch screen has gone dark.
<Power Saver> button is blinking. Switching off the main power under such circumstances may
damage the hard disk and the memory or cause a machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
Job Machine
ABC DEF Log In / Out Status Status
2 3
Dial
Pause
JKL MNO
Clear All
5 6
Interrupt Stop
Speed
TUV WXYZ Dial
Start
8 9
0
C
＃
Power Data Error
Push-button power switch button
Job Machine
ABC DEF Log In / Out Status Status
2 3
Dial
Pause
JKL MNO
Clear All
5 6
Interrupt Stop
Speed
TUV WXYZ Dial
Start
8 9
0
C
＃
Power Data Error
Push-button power switch button
Power
Saver
Power
Saver