Deleting Stored Programs; Entering/Changing A Stored Program Name - Fuji Xerox DocuPrint CM415 AP User Manual

8 Stored Programming
Note
3
Set the feature you want to register.
Note
You can change the volume of the sound that notifies that a stored program is being registered. For information on the
settings, refer to "5 Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming Tone" in the Administrator
Guide.
4
Press the <Start> or <Clear All> button.
Note
For information on how to name a registered stored program, refer to "Entering/Changing a Stored Program Name" (P.344).

Deleting Stored Programs

The following describes how to delete stored programs.
1
Select [Delete].
8
2
Select the number to be deleted.
Note
3
Select [Delete].
 Delete
Deletes the stored program.
Note
 Cancel
Cancels deleting the stored program.

Entering/Changing a Stored Program Name

The following describes how to enter or change the name of a stored program.
Up to 36 characters are allowed for a stored program's name.
For information on how to enter characters, refer to "Entering Text" (P.79).
344
• Once a job is stored to a button, it cannot be overwritten.
• Select [ ] to return to the previous screen or [
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.77).
• The machine sounds an audible tone while a stored program is being registered.
• Press the <Interrupt> button to cancel registration.
• An icon is displayed to the left of each registered stored program for Build Job.
• If no name is entered for a registered stored program, the name becomes "(No Name)".
• Select [ ] to return to the previous screen or [
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.77).
• Deleted stored programs cannot be restored.
] to move to the next screen.
] to move to the next screen.