Invert Image (Making Reversed Copies Of Images); Original Orientation (Specifying The Orientation Of Loaded Documents) - Fuji Xerox DocuPrint CM415 AP User Manual

Specify the amounts of the top and bottom, and left and right margins in the range from 0
to 50 mm in 1 mm increments.
Important • When you use this feature, please be sure to set the paper size. For more information, refer to
 Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in the
range from 0 to 50 mm in 1 mm increments.

Invert Image (Making Reversed Copies of Images)

This feature allows you to reverse the left and right sides of the document image or to create
a negative image of the document when making copies.
Important • When you use this feature, please be sure to set the original size. For more information, refer to
Note
1
Select [Invert Image].
2
Select any option.
 Mirror Image
Reverses the left and right sides of the
document image.
 Negative Image
Creates a negative image of the document.

Original Orientation (Specifying the Orientation of Loaded Documents)

This feature allows you to specify the orientation of a document so that the machine can
identify the top of the document.
Note
1
Select [Original Orientation].
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
• When [Output Color] is set to [Black & White] or [Single Color], the black color on the document is
inverted to white, and the white color to black.
• When [Output Color] is set to [Color], the colors are inverted to their complementary colors.
• When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns to white.
• If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
Layout Adjustment
3
121