Color Balance (Adjusting Color Balance) - Fuji Xerox DocuPrint CM415 AP User Manual

3 Copy

Color Balance (Adjusting Color Balance)

This feature allows you to adjust the color balance of the four CMYK toner colors (cyan,
magenta, yellow and black). You can select from seven levels for each density level:
Highlights, Midtones, and Shadows.
The Color Balance feature finely adjusts the density level for each toner color to fine-tune
the color balance, such as a reddish or bluish tint, while the Lighten/Darken feature adjusts
the overall density level of four colors.
Note
1
Select [Color Balance].
2
3
Select any option.
 Normal
Always copies a document with the density
balance set to "0" for the four toner colors:
yellow, magenta, cyan, and black.
 Basic Color
Allows you to adjust the density level for each
toner color: yellow, magenta, cyan, and black.
 Advanced Color
Allows you to adjust the density level for each
toner color (yellow, magenta, cyan, black) which
is divided to [Highlights], [Midtones], and
[Shadows].
 Highlights
Allows you to adjust the color strength of low-
density areas.
Example:
If low-density yellow is printed darker, adjust the color strength in the minus (-) direction
under [Yellow Balance] > [Highlights].
 Midtones
Allows you to adjust the color strength of medium-density areas.
Example:
If medium-density yellow is printed lighter, adjust the color strength in the plus (+) direction
under [Yellow Balance] > [Midtones].
110
• If [Color Balance] is set concurrently with [Color Effects], the setting made in [Color Effects] will be
cleared.