4 Fax
Specifying a Destination Using the Redial Feature
You can specify recipients using the Redial feature.
Important • When transmission to a certain recipient is prohibited in the System Administration mode, [Redial
1
Select [Redial List].
2
Select items you want to specify for a recipient,
and select [Close].
4
Entering Specific Symbols
When specifying a recipient, you can use the following features to enter specific symbols on
the touch screen.
Enter pause
Transmit using a
password
Transmit DTMF
signal
When using the DTMF method, use specific symbols. For information on the DTMF method, refer to "Remote Folder (Using
Remote Folder)" (P.202) and "Broadcast" (P.217).
184
List] cannot be used.
Feature
Button
- or
<Pause> (-)
S
!
Function
Used to enter a pause.
One pause is 3 seconds.
You can enter pauses of 6
seconds, 9 seconds, etc.
with additional button
presses.
When a password has
been set, transmission will
start only if the password
matches the ID number
on the remote terminal.
Used to transmit the
DTMF signal.
Input method
Press the <Pause> button.
(Example)
0-123 ...
0--123 ...
1. Select the keyboard
button on the [Fax/
Internet Fax] screen to
display the keyboard.
2. Select [S].
(Example)
0312345678S12345678
1. Select the keyboard
button on the [Fax/
Internet Fax] screen to
display the keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#