Scanning Procedure; Step 1 Loading Documents - Fuji Xerox DocuPrint CM415 AP User Manual

5 Scan

Scanning Procedure

This section describes the basic scanning procedure. The following shows the reference
section for each procedure.

Step 1 Loading Documents ....................................................................................................................................................... 230

Step 2 Selecting the Features ................................................................................................................................................... 232
Step 3 Starting the Scan Job..................................................................................................................................................... 235
Step 4 Confirming the Scan Job in Job Status...................................................................................................................... 236
Step 5 Saving the Scanned Data ............................................................................................................................................. 236
Step 1 Loading Documents
The following two methods are available to load documents:
 Document Feeder
 Single sheet
 Multiple sheets
 Document Glass
 Single sheet
5
Bound documents, such as books

Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 5.5 x
5.5" (Standard size: A6) to 8.5 x 14" (Legal size).
The document feeder accepts the following number of sheets.
Plain paper (50 - 80 gsm)
Important • To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted
1
Remove any paper clips and staples before loading a document.
2
Load the document face up (when the
document is 2-sided, place the front side up) in
the center of the document feeder.
Note
230
Document Type (Weight)
documents, curled paper, or back carbon paper.
• The paper whose weight is less than 60 gsm cannot be scanned 2 sided.
• 2-sided scanning of lightweight paper (38 - 49 gsm) is not supported.
• The Confirmation indicator lights up when
the document is loaded correctly. If the
indicator does not light, the machine may be
detecting a document on the document
glass. Load the document again.
Number of Sheets
60 sheets
Confirmation indicator