Part 8. Software And Database Management; Software Management; Database Management - Samsung OfficeServ 7030 Installation Manual

OfficeServ 7030
TECHNICAL MANUAL
PART 8. Software and Database
Management

8.1 Software Management

The OfficeServ 7030 operating software, Voicemail/Auto Attendant software, and all saved
messages and greetings are stored on the OfficeServ 7030 main unit. The OfficeServ 7030
has 1GB of flash memory. The 7030 memory also has the capability to store a backup copy of
the system database in addition to the operating software files. The OfficeServ 7030 also has
the capability to store a backup copy of the system database in addition to the operating
software files.
Software can be downloaded using the IS Tool File Control only and will be stored in flash
memory. The cards will automatically reboot, load and run the new software when the
download process is complete. Files can be deleted using IS Tool, File Control.
Using Installation Tool over a LAN connection to the system, the software files can be
uploaded to the OfficeServ 7030 main unit. Once the files are loaded onto the OfficeServ 7030
system they can be manipulated with MMC 818.

8.2 Database Management

The customer database can be saved to the NAND Flash Memory using MMC 815 where it is
stored as a single file. This save can be performed manually or the system can be programmed
to save the database automatically at a designated time every day. Using Installation Tool, the
database can be downloaded from the system and stored on the PC or it can be uploaded
from the PC to the system. The database uploaded from Installation Tool is not stored on the
media card but is loaded directly into active memory.
8.1
Home Page
INSTALLATION
PART 8 MAY 2010