OfficeServ 7030
TECHNICAL MANUAL
If PoE is used, PoE connection should be connected to the LAN port of the SMT-i5264 (AOM)
first then transfer over to the phone. As shown in Figure 6.17 the SMT-i5264 (AOM) can
transfer the power from the LAN port to the phone port, but the phone can't transfer power
to the AOM.
SETTING-UP SMT-i5264 AOM
SMT-i5264 AOM will register to the OfficeServ system as an IP phone device. It need the IP
phone ID and password during the registration. The SMT-i5264 will receive an IP phone
extension. It can be paired to any IP phone or digital phone as the add-on module. MMC 209 is
used to pair the AOM extension to a master phone.
Figure 6.17 Attaching SMT-i5264 AOM to phone
Figure 6.18 Setting-Up SMT-i5264 AOM
6.20
Home Page
INSTALLATION
PART 6 MAY 2010