OfficeServ 7030
TECHNICAL MANUAL
PART 4. Connecting the Power
This part describes how to connect the power to the OfficeServ 7030 system and how to
connect the external UPS.
4.1 Connecting the Power
4.1.1 Cautions when Connecting the Power
When the input power is normally supplied, the AC current is supplied to the Power Supply
Unit (PSU). If the input power is interrupted, the system can be operated using the external
UPS.
When connecting the power to the OfficeServ 7030 system, pay attention to the following
criteria:
The system supports 110~120 V AC power.
A single AC outlet should be used solely for the system's AC power. Sharing the AC power
with other devices can cause static and/or voltage drop, resulting in system malfunction
or fire.
Use a stable power source that can supply continuous AC power; instantaneous power
failures may cause malfunctions.
4.1
Home Page
INSTALLATION
PART 4 MAY 2010