Figure 6.22 Oit And Modem Connection - Samsung OfficeServ 7030 Installation Manual

OfficeServ 7030
TECHNICAL MANUAL
4. Select the <link type> (e.g. MODEM).
5. Input the Telephone number (e.g. 972-372-4812).
6. Input the Com Port (e.g. COM1).
7. Input the Baud Rate (e.g. 38400bps).
8. Click [Apply].
9. Dialog box shows: "Do you want to apply new setting value?"
10. Click [Yes].
11. Dialog box shows: "The new setting value is applied. "
12. Click [OK]. Click [Close].
13. Click [System]. Click [Connect].
14. Enter User ID [admin]
15. Enter Password [samsung], then [OK].
NOTE: Internal modem card must be installed for the connection to work. The incoming
telco line may need to be programmed to ring directly to modem port of OfficeServ 7030
system in MMC 406 (e.g. Trunk 701 ring to port 3999).

Figure 6.22 OIT and Modem Connection

6.29
Home Page
INSTALLATION
PART 6 MAY 2010