Figure 1.4 Front Side View Of The Officeserv 7030 Cabinet - Samsung OfficeServ 7030 Installation Manual

OfficeServ 7030
TECHNICAL MANUAL
Part
LAN LED
MEM LED
BRI LED
Checking MEM LED before power off
Don't turn off the power during blinking MEM LED. It may cause malfunction of system. If you
want to turn off power, turn off power switch after dismounting MEM with 'Key MMC 817 MEM
UMOUNT'.
See descriptions on the next page.
Function
LAN operation status
- Off: LAN is not connected
- On (Green)
- LAN is connected
- EPM is connected
- Blink (Green): Tx/Rx of data through LAN port
MEM operation status
- Off: Before recognizing Flash memory
- On(Green): After recognizing Flash memory and normal state of the Flash
memory
- Blink (Green): Accessed by application and Read/Write/Erase
The port status
- Off: Not used
- On (Green) : In use
- Blink (Green) : BRI line is activated (NOT USED IN THE US)

Figure 1.4 Front Side View of the OfficeServ 7030 Cabinet

1.6
Home Page
INSTALLATION
PART 1 MAY 2010