Mitel 5330 IP User Manual page 90

5330/5340 IP Phones – User Guide
Answer a call
Do one of the following:
• Lift the cordless headset from the cradle.
• If the headset is already out of the cradle, press the hookswitch button on the headset.
Hang up
Do one of the following:
• Replace the cordless headset in the cradle.
• If the headset is already out of the cradle, press the hookswitch button on the headset.
Dialing – Auto Dial Disabled
To dial a number with Auto Dial disabled:
1. Lift the headset or press the hookswitch.
2. Make the call using the dial pad, or press a programmed speed dial key on the phone.
Dialing – Auto Dial Enabled
To dial with Auto Dial enabled:
•
To dial the predefined Auto Dial number, press the hookswitch on the cordless handset or
headset.
To program Auto Dial, refer to Using the Cordless Devices Application on page 92.
Headset Alerting Tones and LEDs
The cordless accessories provide the following alerting tones:
Feature
Mute ON/OFF
Mute key on Phone ON/OFF
Low battery (within 10 minutes left)
Low battery (within 2 minutes left)
Function
2-pitch tone occurs immediately. Reminder tone occurs
30 seconds after activation and then regularly until
deactivated.
No immediate tone. Reminder tone occurs 30 seconds
after activation and then regularly until deactivated.
3 beeps and 20 second pause
3 rapid beeps and 1.5 second pause
90