Main Messages And Remedies - Olivetti d-COLOR MF652 Troubleshooting Manual

9
9.2

Main messages and remedies

Message
[Originals left on glass.]
[Paper of matching size is not
available.Select the paper size.]
[Load paper into bypass Tray.]
[The original size cannot be de-
tected. Select the paper size.]
[The image will not fit in the se-
lected paper size. Position the
original in a different orienta-
tion.]
[The output tray has reached its
capacity. Remove paper from
the tray indicated by
[Enter a login User Name and
Password, and then touch
[Login] or press [ID].]
[Enter Account Name and Pass-
word, and then touch [Login] or
press the [ID] key.]
[The counter for the account has
reached its maximum allow-
ance.]
[The part indicated by
open. Ensure that it is property
closed.]
[Install Toner Cartridge.]
[Replenish Paper.]
[Toner is low. Replace when in-
dicated.]
[Replace Toner Cartridge.]
[Toner has been depleted. Re-
placed the Toner Cartridge ac-
cording to the instructions.]
[No more staples. Replace the
Staple Cartridge or cancel sta-
pling.]
[Misfeed detected. Remove pa-
per according to the instruc-
tions.]
9-6
Cause
The original has been left on the
Original Glass.
Paper of a suitable size is not
loaded in a paper tray.
Paper of a suitable size is not
loaded in the Bypass Tray.
(1) The original is not loaded cor-
rectly.
(2) The original is a custom size
or a small size that cannot be de-
tected.
The image will be cut off with the
current orientation of the original.
Copying failed as the Output
Tray of the Finisher/Job Sepa-
.] rator marked with
reached its capacity.
User authentication is enabled.
You must enter your user name
and correct password to perform
copying.
Account track settings have
been configured. You must enter
your account name and correct
password to perform copying.
There is a limit to the number of
pages that can be printed by ac-
count.
is Copying failed as the door or
cover of this machine is open or
the optional device is not secure-
ly closed.
The Toner Cartridge is not in-
stalled correctly.
The indicated tray has run out of
paper.
The toner is about to run out.
The toner is about to run out.
Toner is depleted.
The staples have run out.
Copying cannot be performed
due to a paper jam.
Main messages and remedies
Remedy
Remove the original from the
Original Glass.
Either select paper of a different
size or load paper of a suitable
size.
Load paper of the appropriate
size into the Bypass Tray.
(1) Position the original correctly.
(2) Select the paper size and start
copying.
Rotate the original by 90 degrees
to load it correctly.
Remove all paper from the tray
marked with
has
Enter your user name and cor-
rect password.
Enter the account name and cor-
rect password.
Contact the administrator of the
machine.
Be sure to securely close the
door or cover of this machine
that is marked with
door or cover of the optional de-
vice.
Reinstall each consumable and
replaceable part. Otherwise,
contact your service representa-
tive.
Add paper into the indicated
tray.
According to the maintenance
agreement, prepare a spare
Toner Cartridge.
According to the maintenance
agreement, replace the indicated
Toner Cartridge.
According to the maintenance
agreement, replace the indicated
Toner Cartridge.
Replace the Staple Cartridge.
Follow the guidance (instruc-
tions) to remove jammed paper.
9.2
.
, and the
d-Color MF 752/652