8.3
G3 fax error code
8.3
G3 fax error code
Transmission system error code
If the machine encounters a problem while sending a G3 fax, an error dialog will appear and error codes will
be displayed in Txx format. Take corrective actions by referring to the table below.
Code
T00
T05
T08
T18
T28
T32
T42
T43
T48
T58
T60
T61
T62
T80
T81
T82
T85
T89
T95
T97
T98
T99
d-Color MF 752/652
Corrective Actions
•
Check to see if the destination is correct.
•
Check the state of the recipient.
Check the state of the recipient.
Check the line status.
Check the state of the recipient.
Check the state of the recipient.
Check the line status.
Check the line status.
Check the line status.
•
Check to see if the destination is correct.
•
Check that the fax number registered with the recipient is correct.
The document to be sent by polling is not registered in the sender's machine. Ask the
sender to set the document.
Register the document that is sent to the recipient by polling.
Check whether the document to be sent by polling from the bulletin board is registered.
Inform the recipient of the correct bulletin board number.
Check the line status.
Check the line status.
•
Check to see if the destination is correct.
•
Check the state of the recipient.
Check the line status.
Check the balance in the billing management device.
Check the line status.
Check the state of the fax board. (Contact your service representative. )
Forwarding is not available for that combination. Check the forwarding settings.
Check the destinations registered in the address book.
8
8-5