Cleaning The Electrostatic Charger Wire - Olivetti d-COLOR MF652 Troubleshooting Manual

3.1

Cleaning the Electrostatic Charger Wire

3 When Printing Quality Has Deteriorated
3.1 Cleaning the Electrostatic Charger Wire
If the Electrostatic Charger Wire is dirty, linear smudges may appear on a print image. If this occurs, clean
the Electrostatic Charger Wire according to the following procedure.
1
Open the Lower Front Door of the machine.
2
Carefully pull out the Charger Cleaner towards yourself up to
the position at which it stops. Then, carefully press it against
the back side.
Repeat the steps above three times.
3
Securely press the Charger Cleaner, and close the Lower Front Door of the machine.
d-Color MF 752/652
3
3-3