Programmable One-Touch Keys - NEC SL1100 Programming Manual

ISSUE 6.0
Program 15 : Extension, Basic Setup
Level:
SB
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch key data for each
multiline terminal.
For each SL1100 Wireless telephone to use the Transfer When Out of Range feature, enter the
destination number (up to 36 digits) and name (up to 12 characters) into One-Touch bin 10. Make sure
to add any required trunk access codes for outside numbers. If this bin information is changed either
through 15-14-01 or through user programming, the destination for the transferred calls is also
changed.
Input Data
Extension Number
Key Number
Item Item
No.
01 Dial Data
02 Name
Conditions
None
Feature Cross Reference
None
Programming Manual

15-14 : Programmable One-Touch Keys

Input Data
Maximum of 36 digits (0 If PRG 15-02-60 is set to a (0) then the
~ 9, , #, @, P, R) stations personal speed dial entries are
*
@ = Wait for Answer Su- programmed here.
pervision - ISDN trunks Per key number (1 ~ 10) assign the tele-
only phone number that is to be called when
P = Pause - Analog the bin is accessed.
Trunk Only
R = Hook flash - Analog
Trunk Only
Maximum of 12 charac- Per key number (1 ~ 10) assign a name to
ters be used when searching through the direc-
tory.
If a name is not assigned for a speed dial
bin the speed dial entry will not be listed in
the directory.
Maximum eight digits
01 ~ 10
Description
SL1100
Program
15
Default
No Setting
No Setting
2-155