Program 35 : Smdr Account Code Setup; Smdr Options - NEC SL1100 Programming Manual

ISSUE 6.0

Program 35 : SMDR Account Code Setup

Level:
IN
Description
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording) options
for each of the eight SMDR ports. Refer to the following chart for a description of each option, its
range and default setting.
Input Data
SMDR Port Number
Item Item
No.
01 Output Port Type
03 Header Language
04 Omit Digits
05 Minimum Digits
06 Minimum Call Dura-
tion
07 Minimum Ring Time
(For Incoming Calls)
08 Format Selection
Conditions
None
Programming Manual
Input Data
0 = No Setting (SMDR This option specifies the type of connec-
disabled) tion used for SMDR. The baud rate for the
3 = LAN (SMDR enabled COM port should be set in Program
and sent out of the LAN 10-21-02 or 15-02-19.
port.)
0 = English Specify the language in which the SMDR
1 = German header should be printed.
2 = French
3 = Italian
4 = Spanish
0 ~ 24 (0 = Not applied) The number of digits entered in this option
does not print on the SMDR report. For ex-
ample, if the entry is 10, the first 10 digits a
user dials do not appear on the SMDR re-
port.
0 ~ 24 (0 = Not applied) Outgoing calls must be at least this num-
ber of digits for inclusion in the SMDR re-
port.
0 ~ 65535 seconds (0 = The duration of the call must be at least
All) this time to be included on the SMDR re-
port.
0 ~ 65535 seconds (0 = A call must ring for at least this time to be
All) included on the SMDR report.
0 = Format1 Type (North
America)
1 = Format2 Type (Over-
seas)

35-01 : SMDR Options

1 ~ 2
Description
SMDR port1 : 3
SMDR port2 : 0
SL1100
Program
35
Default
0
0
0
0
0
0
2-349