Sip Trunk Registration Information Setup - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 10-36 : SIP Trunk Registration Information Setup to set the SIP trunk registration
Program
information.
10
Input Data
Item
No.
01 Registration
02 User ID
03 Authentication User
ID
04 Authentication Pass-
word
Conditions
None
Feature Cross Reference
None
2-36
Program 10 : System Configuration Setup

10-36 : SIP Trunk Registration Information Setup

Profile
(V5.0 Added)
Register ID
Item Input Data
0 = Disable
1 = Enable
Up to 32 Characters
When assigning the
User ID, the ID may con-
tain only alpha charac-
ters. (A space and/or
special characters are
not allowed in the User
ID field). (V5.0 Added)
(ex. : UserID@Host-
Name.DomainName)
(V5.0 Added)
Up to 64 Characters
Up to 32 Characters
1 ~ 2
0 ~ 31 (V5.0 Changed)
Description
This setting determines if the SIP trunk in-
formation is registered.
User ID in the SIP Invite Setup message.
Use it for outbound caller ID information if
no information is assigned in commands
21-17, 21-19, 15-16, 14-12 and 10-36. A
call cannot be completed across the span
if there is no outbound CID info. The rea-
son for this is: the from and display portion
of the invite message would be blank, and
it would not know where the call originated
from. (V5.0 Changed)
This sets the user name of the SIP trunk.
(V5.0 Changed)
This sets the SIP trunk password. (V5.0
Changed)
Program 10 : System Configuration Setup
ISSUE 6.0
Default
0
No Setting
No Setting
No Setting