Account Code Entry - NEC Univerge SV 9100 User Manual

Account Code Entry

To enter an Account Code any time while on a trunk
call:
The outside caller cannot hear the Account Code digits
you enter. You can use this procedure if your system
has Optional Account Codes enabled. You may also be
able to use this procedure for incoming calls.
1. Dial *.
-OR-
Press your Account Code key
(Service Code 751:Code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
#).
Line 001
ENTER ACCOUNT CODE
Conf Rpt
If Account Codes are hidden, each digit you
Note:
dial shows as a "*" character on the
telephone's display.
3. Dial *.
-OR-
Press your Account Code key
(Service Code 751:Code 50).
Save Trf
To enter an Account Code before dialing the outside
number:
If your system has Forced Account Codes, you must
use this procedure. If it has Verified Account Codes,
you can use this procedure instead of letting the system
prompt you for your Account Code. You may also use
this procedure if your system has Optional Account
Codes. If your system has Verified Account Codes
enabled, be sure to choose a code programmed into
your Verified Account Code list.
1. Access trunk for outside call.
You can access a trunk by pressing a Line key
Note:
or dialing a code (except 9).
2. Dial *.
-OR-
Press your Account Code key (Service Code
751:Code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and
#).
If you make an incorrect entry, your system
Note:
may automatically alert the operator. If
Account Codes are hidden, each digit you dial
will show as a "*" character on the
telephone's display.
STEP 4:
Dial *.
-OR-
5. Dial the number you want to call.
37