Setup Of Destination - Oki C5500 Maintenance Manual

• The CU Serial Number is output in the Printer Serial Number field of the Menu Map
header section. Therefore, after the CU Serial Number has been rewritten, it can be
checked by conducting the Menu Map print.
(2) For OEL destination
• For CU Serial Number, a unique Serial Number within 12 digits is assigned at the UK
Plant.
• Notice that, when the CU Serial Number is set, the menu settings inside the CU are
reset (restored to the default settings). (See the Maintenance Utility Operation Manual.)
• On "Subsection 2.4.1.1.4.3 Serial Number information setup screen" of "Subsection
2.4.1.1.4 CU PCB setup function" of the maintenance utility, set"Select Printer Serial
Number" to "CU Serial Number" and [Display Mode], to "Show Both".
• To specify the CU Serial Number, enter a number within 12 digits (Notice that, when the
CU Serial Number is read, it is also a number within 12 digits.)
• The CU Serial Number is output in the Printer Serial Number field of the Menu Map
header section. Therefore, after the CU Serial Number has been rewritten, it can be
checked by conducting the Menu Map print.
• The PU Serial Number is output in the Lot Number field in the bottom line of the Menu
Map header section.

5.4.3 Setup of destination

[Checking method: Menu Map Print (C6100/C5800/C5500)]
Always set the destination prior to shipping out a printer or maintenance PCB, since the default
setting is OEL.
Note! This setting is stored on the EEPROM of the SP1/TBH PCB.
1. Setup on the operation panel: Start the printer in the maintenance mode, and set the destination.
• Turn on the power with the MENU+ and MENU- key held down.
• "Maintenance Menu" will be displayed briefly, which will change to "OKIUSER".
• Press the MENU+ key to select the destination setting "OKIUSER" and press the ENTER
key.
• "OEL" will appear in the lower line of the LCD.
• Press the ENTER key, select the destination by operating the MENU+ or MENU- key,
and press the ENTER key.
• Press the BACK key to define the setting. "JP1"
• Press the BACK key twice, or the ONLINE key once. This will cause the printer to restart
with the destination modified.
43085101TH Rev.1
Enter 12-digit Serial Number. Enter "4AEL4011702K."
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in Thailand
Configured in UK
Figure of Serial No. label image (labeled in UK Factory)
Oki Data CONFIDENTIAL
153 /