Oki C5500 Maintenance Manual page 167

Table of Contents

Advertisement

Display on Operator Panel
INSTALL DUPLEX UNIT
%ERRCODE%:DUPLEX UNIT OPEN
REPLACE IMAGE DRUM
%ERRCODE%:%COLOR% DRUM LIFE
REPLACE IMAGE DRUM
%ERRCODE%:%COLOR% DRUM LIFE
REPLACE FUSER
%ERRCODE%:FUSER LIFE
REPLACE BELT
%ERRCODE%:BELT LIFE
REPLACE BELT
%ERRCODE%:BELT LIFE
CHECK TONER CARTRIDGE
%ERRCODE%:%COLOR% IMPROPER
LOCK LEVER POSITION
CHECK IMAGE DRUM
%ERRCODE%:%COLOR% DRUM
MISSING
CHECK IMAGE DRUM & BELT LOCK
%ERRCODE%:K DRUM MISSING
CHECK FUSER
%ERRCODE%:FUSER MISSING
43085101TH Rev.1
Table 7-1-1 Operator Alarm (7/9)
Ready
Attention
LED
LED
Off
Blink
Duplex unit is open (removed). When this error is
detected, printing stops.
Off
Blink
The life of the image drum (Alarm)
Error 350 : Y
Error 351 : M
Error 352 : C
Error 353 : K
Warning status takes effect at Cover Open/Close.
Off
Blink
The toner empty error is occurred after the image drum
reached its life.
Error 560 : Y
Error 561 : M
Error 562 : C
Error 563 : K
This is displayed until a user exchanges the image drum.
Off
Blink
Notifies the fuser has reached its life. This is the error
displayed based on the counter to indicate that the fuser
has reached its life, and printing will stop.
Warning status takes effect at Cover Open/Close.
This error will occur on some user setting mode.
Off
Blink
Notifies the transfer belt has reached its life. This is the
error displayed based on the counter to indicate that the
belt has reached its life, and printing will stop.
Warning status takes effect at Cover Open/Close.
Off
Blink
Indicates waste toner full. Warning status takes effect
only once at Cover Open/Close, and the error occurs
again when about 500 copies have been printed.
Off
Blink
Shows that the toner cartridge lever has not been
locked.
Error 544 : Y
Error 545 : M
Error 546 : C
Error 547 : K
Off
Blink
The image drum is not correctly installed.
Error 340 : Y
Error 341 : M
Error 342 : C
Off
Blink
Indicates that the belt is unlocked or the black image
drum is not set properly.
Off
Blink
The fuser unit is not correctly installed.
(This error is likely issued when the printer is cool at 0 deg.C or
lower. Turn on the power again after the printer has warmed up.)
Oki Data CONFIDENTIAL
Description
Code
nnn
Error
360
Error
350
351
352
353
Error
560
561
562
563
Error
354
Error
355
Error
356
Error
544
545
546
547
Error
340
341
342
Error
343
Error
320
167 /

Advertisement

Table of Contents
loading

This manual is also suitable for:

C5800C6100

Table of Contents