Indication Of Printed; Factory/Shipping Switching - Oki C5500 Maintenance Manual

5.3.2.9 Indication of printed page counters
This self-diagnosis is practiced to indicate the current number of printed pages of the printer.
1. Activate the normal self-diagnostic mode, and press and hold down the [MENU+] key or [MENU-
] key, until "PRINTER STATUS" appears in the display section, and then, press the ENTER
key. (The MENU+ key increments a test item, and the MENU- key decrements a test item.)
2. Pressing the [MENU+] key or [MENU-] key causes the current number of printed pages to be
displayed sequentially. (ONLINE and CANCEL keys inactive to pressing)
3. Press the [BACK] key to terminate the test. (Status of Item 1 restored)
Display Upper
K-IMPRESSIONS
Y-IMPRESSIONS
M-IMPRESSIONS
C-IMPRESSIONS
TOTAL SHEET CNT

5.3.2.10 Factory/Shipping switching

This self-diagnosis is practiced to switch the PU(PRN) PCB between the Factory mode and the
Shipping mode.
1. Activate the self-diagnostic (Level 1) mode, and press and hold down the [MENU+] key or
[MENU-] key, until the following message appears.
FACTORY MODE SET
2. Pressing the [ENTER] key causes the following message to appear. Press and hold down the
[MENU+] key or [MENU-], until the intended item (See the table below) is displayed.
FACTORY MODE
SHIPPING MODE
3. Pressing the [ENTER] key while the desired set item remains displayed selects the set value.
4. Pressing and holding down (3 sec) the [ENTER] key while the value you want to set remains
displayed registers the currently displayed value on the EEPROM. Then, the status of Item 2
will be restored.
5. Repeat Items 2 to 4, as needed.
43085101TH Rev.1
Display Lower Format
********IMAGES DEC
********IMAGES DEC
********IMAGES DEC
********IMAGES DEC
********COUNTS DEC
*
Unit
Function
Images The printing number of sheets of each
Images color.
Images
Images
Prints The indication of the total printing
number of sheets
Oki Data CONFIDENTIAL
134 /