Self-Diagnostic Mode; Operator Panel; Normal Self-Diagnostic Mode (Level 1) - Oki C5500 Maintenance Manual

5.3.2 Self-diagnostic mode

Individual explanation of LEVEL0 and LEVEL1.

5.3.2.1 Operator panel

The explanation of the operations relating to the self-diagnosis presupposes the
Self-diagnostic
mode layout (Overall)
LEVEL0-engine status indication
Engine status indication
(Heater temperature)
(Environmental temperature
& humidity indication)
Indication of each voltage
(TR, CH, DB, SB) during printing
Toner sensor
RFID internal noise monitoring
Error detail
43085101TH Rev.1
(1) Transition of menu items
xxxxx Level transition is possible only when a part is displayed.
xxxxx
Transition of is activated with [MENU-] or [MENU+].
POWER ON
Not pressed
Normal operation mode
Press [MENU+] and [ONLINE]
simultaneously.(3seconds)
Press [MENU-], [MENU+], [ENTER] and
[BACK] simultaneously.(6seconds)
Hold down [MENU+] and [MENU-], until the system
maintenance menu is displayed.
Then, select ENGINE DIAG MODE and press [ENTER].
LEVEL1-ENGINE DIAG MODE XX.XX
MOTOR & CLUTCH TEST
Oki Data CONFIDENTIAL
SWITCH SCAN
TEST PRINT
REG ADJUST TEST
DENS ADJ TEST
CONSUMABLE STATUS
PRINTER STATUS
FACTORY MODE SET
SENSOR SETTING
LED HEAD DATA
116 /