Lcd Message List - Oki C5500 Maintenance Manual

7.5.1 LCD Message List

When the printer detects an irrecoverable error, it displays a service call error in the LCD like the
one given below:
Service call
nnn: error
Note! "nnn" is an error code.
When a service call error is issued, an error code is displayed in the lower line of the LCD,
accompanied by the relevant error information. Be sure to make a note of this error information
(numeric values representing an address, etc.) and communicate it to the related departments,
since such information will be required for the subsequent trouble analysis/solution. The error
codes and their meanings, as well as the related remedial methods, are given in Table 7-1-1.
Display on Operator Panel
LOAD %MEDIA_SIZE%/
%MEDIA_TYPE% AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY% MEDIA
MISMATCH
LOAD %MEDIA_SIZE%/
%MEDIA_TYPE% AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY% MEDIA
MISMATCH
43085101TH Rev.1
Table 7-1-1 Operator Alarm (1/9)
Ready
Attention
LED LED
Off Blink The media type in the tray and the print data do not
match. Load mmmmmmm/pppppp paper in tttttt tray (It
takes a while until the status disappears after you have
closed the tray and the lever lifted.)
(tttttt:TrayName,mmmmmm:PaperName.pppppp:MediaTypeName)
Error 661 : Tray1
Error 662 : Ttay2
Error 461 : Tray1
Error 462 : Ttay2
Paper size displays in Custom mode:
"<width>x<length><unit>"
ex.) 210x297MM
8.5x11.0INCH
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
As a user pressed ONLINE key, the printer could ignore
this error at the just printing job.
Off Blink The media type in the tray and the print data do not
match. Load paper in tray (It takes a while until the
status disappears after you have closed the tray and the
lever lifted.)
(%TRAY%TrayName,%MEDIA_SIZE%:
PaperName.%MEDIA_TYPE%:MediaTypeName)
Error 660 : MPTray
Error 460 : MPTray
Paper size displays in Custom mode:
"<width>x<length><unit>"
ex.) 210x297MM
8.5x11.0INCH
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
A user needs to press ONLINE key after changing the
paper.
Oki Data CONFIDENTIAL
Description
Code
nnn
Error
461
462
Error
460
161 /