Register-Level Programming; Figure 1-1. The Relationship Between The Programming Environment, Ni-Daq, And Your Hardware - National Instruments PC-LPM-16/PnP User Manual

Chapter 1 Introduction
Programming Environment
Sun SPARCstation)

Register-Level Programming

PC-LPM-16/PnP User Manual
Conventional
(PC, Macintosh, or
DAQ or
SCXI Hardware
Figure 1-1. The Relationship between the Programming Environment, NI-DAQ,
The final option for programming any National Instruments DAQ
hardware is to write register-level software. Writing register-level
programming software can be very time-consuming and inefficient and
is not recommended for most users.
Even if you are an experienced register-level programmer, consider
using NI-DAQ, LabVIEW, or LabWindows/CVI to program your
National Instruments DAQ hardware. Using the NI-DAQ, LabVIEW, or
LabWindows/CVI software is as easy and as flexible as register-level
programming and can save weeks of development time.
LabVIEW
(PC, Macintosh, or
Sun SPARCstation)
NI-DAQ
Driver Software
and Your Hardware
1-4
LabWindows/CVI
(PC or Sun
SPARCstation)
Personal
Computer or
Workstation
National Instruments Corporation