Table of Contents
Advertisement
Organization of This Manual
National Instruments Corporation
This manual describes the mechanical and electrical aspects of the
PC-LPM-16PnP and contains information concerning its installation,
operation, and programming. The PC-LPM-16PnP is a low-cost, low-
power analog input, digital, and timing I/O board for the IBM PC/XT,
PC AT, Personal System/2 Models 25 and 30, and laptop compatible
computers.
This manual also applies to the PC-LPM-16, a non-Plug and Play board.
The boards are identical in functionality, programming, and
performance, except for the differences listed in Appendix C, Using
Your PC-LPM-16 (Non-PnP) Board.
The PC-LPM-16/PnP User Manual is organized as follows:
•
Chapter 1, Introduction, describes the PC-LPM-16/PnP, lists what
you need to get started, software programming choices, and
optional equipment, and explains how to unpack the
PC-LPM-16/PnP.
•
Chapter 2, Installation and Configuration, describes the
installation and configuration of the PC-LPM-16PnP.
•
Chapter 3, Theory of Operation, includes an overview of the
PC-LPM-16PnP board and explains the operation of each
functional unit making up the board. This chapter also explains the
basic operation of the PC-LPM-16PnP circuitry.
•
Chapter 4, Signal Connections, describes how to make input and
output signal connections to your PC-LPM-16PnP board via the
I/O connector.
•
Appendix A, Specifications, lists the specifications of the
PC-LPM-16PnP.
•
Appendix B, MSM82C53 Data Sheet, contains a manufacturer data
sheet for the MSM82C53 CMOS programmable interval timer
(OKI Semiconductor).
ix
About
This
Manual
PC-LPM-16/PnP User Manual
Advertisement
Table of Contents
