Register-Level Programming; Figure 1-1. The Relationship Between The Programming Environment; Ni-Daq, And Your Hardware - National Instruments DAQ PCI-6023E User Manual

Register-Level Programming

© National Instruments Corporation
Conventional
Programming Environment
DAQ or
SCXI Hardware

Figure 1-1. The Relationship between the Programming Environment,

The final option for programming any National Instruments DAQ
hardware is to write register-level software. Writing register-level
programming software can be very time-consuming and inefficient,
and is not recommended for most users.
Even if you are an experienced register-level programmer, using NI-DAQ
or application software to program your National Instruments DAQ
hardware is easier than, and as flexible as, register-level programming,
and can save weeks of development time.
NI-DAQ
Driver Software

NI-DAQ, and Your Hardware

1-5
Chapter 1 Introduction
ComponentWorks,
LabVIEW,
LabWindows/CVI, or
VirtualBench
Personal
Computer or
Workstation
PCI-6023E/6024E/6025E User Manual