Register-Level Programming; Figure 1-1. The Relationship Between The Programming Environment - National Instruments PC-DIO-24/PnP User Manual

Chapter 1 Introduction

Register-Level Programming

PC-DIO-24/PnP User Manual
Conventional
Programming Environment
DAQ or
SCXI Hardware

Figure 1-1. The Relationship between the Programming Environment,

The final option for programming any National Instruments DAQ
hardware is to write register-level software. Writing register-level
programming software can be very time-consuming and inefficient,
and is not recommended for most users.
Even if you are an experienced register-level programmer, consider
using National Instruments application software to program your
National Instruments DAQ hardware. Using the National Instruments
application software is easier than, and as flexible as, register-level
programming, and can save weeks of development time.
NI-DAQ
Driver Software
NI-DAQ, and Your Hardware
1-4
ComponentWorks,
LabVIEW,
LabWindows/CVI, or
VirtualBench
Personal
Computer or
Workstation
© National Instruments Corporation