Wolf SO27TM/S/TH Design Manual page 68

WOLF INTEGRATED MODULES
Planning Information
Refer to the illustrations on the following pages for instal-
lation of integrated modules. For induction and electric
modules, refer to the previous cooktop sections.
ELECTRICAL
Installation must comply with all applicable electrical codes.
Locate the electrical supply as shown in the illustrations on
the following pages. A separate circuit, servicing only this
appliance is required.
When multiple cooktops or modules are installed side by
side, each must have its own separate electrical supply.
ELECTRICAL REQUIREMENTS
ELECTRIC MODULES
Electrical Supply grounded 3-wire, 240/208 VAC, 60 Hz
Steamer, Fryer
Induction, Electric, Grill
Conduit
GAS MODULES
Electrical Supply
Service
Receptacle
Power Cord
|
68 Wolf Customer Care 800.222.7820
15 amp dedicated circuit
20 amp dedicated circuit
flexible 4'
(1.2 m)
grounded, 120 VAC, 60 Hz
15 amp dedicated circuit
3-prong grounding-type
6'
(1.8 m)
DRAIN OUTLET
Steamer and fryer modules require a method for draining
hot water and oil. For the steamer module, options include
connecting a drain hose from the
an existing drain, a separate drain with freefall or placing a
heat-resistant receptacle under the drain outlet. For the fryer
module, the drain outlet must be accessible to drain oil into
heat-resistant receptacle.
5
/ " outlet tied into
(16)
8