Wolf SO27TM/S/TH Design Manual page 103

WOLF OUTDOOR GRILLS
Outdoor Grills and Modules
BURNER RATING
GRILL BURNERS
OG30, OG36, OG42, BM13
OG54
SEAR ZONE
OG36, OG42
OG54
ROTISSERIE
OG30
OG36, OG42
OG54
Planning Information
For portable applications, Wolf grill carts are designed
specifically to fit grill models OG30, OG36 and OG42 and
BTU
(KW)
the side burner. Model OG54 is designed for built-in appli-
25,000
(7.3)
25,500
(7.5)
cations only.
BTU
(KW)
For built-in applications, Wolf outdoor grills and the burner
25,000
(7.3)
module are designed for easy placement into a built-in
25,500
(7.5)
enclosure. For outdoor grills, installation in a combustible
BTU
(KW)
enclosure requires an insulating liner. For the burner module,
14,000
(4.1)
an insulating liner is not required. The enclosure should be
16,000
(4.7)
built according to specifications for your specific installa-
(2) 14,000
(4.1)
tion on the following pages. If the burner module is installed
next to an outdoor grill, a minimum of 12"
between units on the rotisserie motor side and 2"
opposite side. A rotisserie side conversion kit is available
from an authorized Wolf dealer.
Optional stainless steel accessory doors and drawers are
available for built-in applications.
Grill carts, insulating liners and stainless steel doors and
drawers are avail able through an authorized Wolf dealer. For
local dealer information, visit the find a showroom section of
our website, wolfappliance.com.
is required
(305)
on the
(51)
|
wolfappliance.com 103