EM-12
ENGTNE MECHANICAU
-
Oi"t"t
engin"
Di
ENGINE WILL NOT RETURN TO IDLE
(Possible Cause)
(Check Procedure and Correction Method)
Operate adjusting lever on side of injection pump
and
check if engine returns
to
idle'
lf
so,
the accelerator cable is binding or improperly
adjusted and should be repaired accordingly'
lf engine does not return to idle, the injection pump
is
faulty and should be
rePaired.
BINDING ACCELERATOR CABLE
ENGINE WILL NOT SHUT
OFF
WITH
KEY
(Possible Cause)
(Gheck Procedure and Correction Method)
Disconnect connector on top of fuel cut solenoid and
check if engine
stops.
lf so, ignition switch
is
faulty and should be repaired
as
necessarY
or
rePlaced.
lf engine does not stop, either fuel cut solenoid
is
faulty or there is interference
by
foreign particles'
Repair
as
necessarY.
IMPROPER FUEL CUT-SOLENOID
OPERATION