Replacement Of Drive Spline - Toyota 3b Repair Manual

LUBRICATION SYSTEM
LU01
1
I
REPLACEMENT OF DRIVE SPLINE
1.
REMOVE DRIVE SPLINE
(a)
Remove
the two set
keYs.
(b)
Set the drive spline
with the hole facing downward by
turning the crankshaft.
NOTICE: Do not turn the crankshaft more
than
1,/4
revolution.
(c)
Using a
chisel and hammer, tap the drive spline out of
the
hole
until
SST
can be hooked
to spline's
end.
(d)
Using SST,
remove the drive spline.
ssT 09950-2@17
2.
INSTALL NEW DRIVE SPLINE
(a)
Using SST
and a hammer,tap in the drive spline.
ssr 09608-3501 4 (09608-06040)
(b)
lnstall the two set keys.