Toshiba T3200 Owner's Manual page 67

PART 6 OPERATION
6.1
Before You Begin
Make sure of the following.
o The system
is
on a flat working surface at a
comfortable height.
o The voltage selection switch is set properly (115 V
or 230V depending on the voltage to the outlet
you are using).
o The ac power cable is firmly connected to the
computer and to a wall outlet.
o If present, the cardboard protector has been
removed from external floppy disk drives.
o The configuration switches reflect your actual
setup.
o Your hard disk has been formatted as a system
disk and the MS-DOS command files copied to it.
o You have several blank 3.5-inch disks.
o Any external option, such as a disk drive or
printer, is connected.
6-1