1.8
Preparing the Enterprise 4500 System
Caution – The server weighs more than 150 lbs (68 kg). Two people are needed to
lift the server safely.
You need the following tools:
No. 1 Phillips screwdriver
Front panel key (packed in a bag in the accessory box)
Follow the graphic instructions on the shipping container to remove the server from
the container. The front panel key and the power cord are in the shipping container.
1.9
Using the User Naming Area
The front of the server has an area for a label where you can list the system name or
other information. The document set includes gray paper that is suitable for a label.
To add a label to the front of the system:
1. Remove the top front bezel.
Refer to Chapter 12, "Preparing for Service," in the Sun Enterprise 6500/5500/4500
Systems Reference Manual.
Enterprise 6500/5500 systems: refer to Section 12.3.3, "Top Front Bezel."
Enterprise 4500 system: refer to Section 12.4.1, "Top Bezel."
2. Snap out the narrow transparent window.
From the rear side of the bezel, gently squeeze the top and bottom edges together as
you simultaneously push the transparent window out through the front of the bezel.
3. Choose the information that will appear on the label.
Common items include the name of the server, IP address, name and contact
information for the system administrator, and the group of users that the machine
services.
4. Use the colored paper provided with the system to make a label.
Print or write the desired information and cut the label to fit the transparent
window. The label should be 0.5 in x 5.9 in (12 mm x 150 mm).
Chapter 1
Preparing for Installation
1-15