Preparing The Enterprise 6500/5500 Cabinet Systems; Moving The Server - Sun Microsystems 6500 Installation Manual

1.6 Preparing the Enterprise 6500/5500
Cabinet Systems
You need the following tools:
No. 1 Phillips screwdriver
Levelling wrench (packed inside the system cabinet)
Front panel key (packed in a bag in the accessory box)
1.6.1

Moving the Server

The server weighs at least 835 pounds (375 kg). Observe the following precautions
when moving the server.
Caution – Three or more people are needed to move the server cabinet safely. Two
people must push at the front of the cabinet to control the movement of the cabinet
(
FIGURE 1-7
Caution – To prevent the cabinet from tipping over, push or pull only on the upper
half of the cabinet.
).
Chapter 1 Preparing for Installation 1-11