Table of Contents
Advertisement
FEATURE
OPTION
Register/
Compression
Edit (cont.)
Rate
Edge Erase
Erase Center
Contrast
Hue
Saturation
RGB
Delete
Yes, No
View Information
FEATURE
DESCRIPTION
Print Count
Displays the print count from all available trays.
Displays the number of color and mono A4/letter impressions.
Scan
Displays the number of pages scanned from the flatbed and ADF.
Supplies Status
Displays consumable status information.
System
Displays system information:
1. Serial No.
2. Asset No.
3. Lot No.
4. CU Version
5. PU Version
6. SIP Version
7. Scanner Version
8. Total Memory
9. Flash Memory
Color:
High, Medium, Low
Mono (Grayscale):
High, Medium, Low
Mono (Binary):
High (G4), Medium (G3), Raw
OFF, ON
OFF, ON
-3, -2, -1, 0, +1, +2, +3
[R] -3, -2, -1, 0, +1, +2, +3 [G]
[Low] -3, -2, -1, 0, +1, +2, +3
[High]
[R] -3, -2,
-1, 0, +1, +2, +3
[G] -3, -2,
-1, 0, +1, +2, +3
[B] -3, -2,
-1, 0, +1, +2, +3
Configuring Your Machine > 36
DESCRIPTION
Select the appropriate compression
level. Remember the higher the
compression the bigger the file size!
Adjust the width settings using the
arrow buttons.
Input range: 05-50 mm
Adjust the width settings using the
arrow buttons.
Input range: 01-50 mm
Adjust contrast setting.
High: Enhance brightness
Low: Reduce brightness
Adjust R/G balance settings.
[G]: Enhance green
[R]: Enhance red
Adjust saturation setting.
High: Enhance image sharpness
Low: Reduce hue
Adjust RGB contrast settings.
Select profile number to delete.
Press Yes to confirm or No to cancel.
Advertisement
Table of Contents
