Table of Contents
Advertisement
STATUS /
MESSAGE
CODE
Error
Please check %COLOR% Toner
Cartridge: %ERRCODE%
544
545
546
547
Error
Please check %COLOR% Image Drum
340
341
342
343
Error
Please check Fuser Unit
320
Error
Please check Belt Unit
330
Error
Power Off and Wait for a while
321
Error
Cover Open
310
Close the flashing cover
311
Error
Cover Open
316
Close the flashing cover
Error
Cover Open
Close the flashing cover
Error
Document jam!
Open & check the
flashing cover
Error
Wait a Moment
Program Data Receiving
Error
Wait a Moment
Program Data Received OK
MEANING / ACTION
Toner cartridge lever has not been
locked.
Lock into place securely.
Error 544: Y
Error 545: M
Error 546: C
Error 547: K
Image drum not installed correctly.
Fit image drum.
Error 340: Y
Error 341: M
Error 342: C
Error 343: K
Fuser unit is not installed correctly.
Fit fuser unit.
Belt unit is not installed correctly.
Fit belt unit.
Motor driver IC overheat detected.
Close the cover.
Error 310: Top cover
Error 311: Front cover
If the code still appears, contact your
dealer.
Close the duplex cover.
If the code still appears, contact your
dealer.
Indicates that the ADF cover is open.
Indicates that the inter-lock cover on
the scanner unit is lifted up.
Note: If the inter-lock cover is lifted up
during scanning from the ADF, a
document jam message will display.
If the code still appears, contact your
dealer.
Indicates a document jam has occurred
during scanning.
See "Clearing Paper Jams"
If the code still appears, contact your
dealer.
Your machine's network card firmware
is being reprogrammed.
Your machine's network card firmware
is being reprogrammed.
Troubleshooting > 166
.
Advertisement
Table of Contents
