Table of Contents
Advertisement
Configuration
There are a number of configuration options available which allow you to change the
scanner, fax and printer settings to suit your own needs. There are three methods of
configuring your unit:
1.
From the unit's web page.
2.
From the unit's Configuration Tool utility.
3.
From the unit control panel.
For illustration purposes only, the configuration options shown are as accessed via the
control panel.
...from the Web Page
Type the IP address of the unit in the URL field of your browser and then press Enter. The
unit web page displays. For example: http://192.168.1.94.
NOTE
The Administrative Settings are blocked by a password. Refer to "Pre-
configuration Information" on page 23.
...from the Configuration Tool Utility
If you have not already done so, install the unit Configuration Tool.
NOTE
The Administrative Settings are blocked by a password. Refer to "Pre-
configuration Information" on page 23.
...from the Control Panel
Press the SETUP button on the control panel.
NOTE
The Admin Setup option is blocked by a password. Refer to "Pre-
configuration Information" on page 23.
Configuring Your Machine > 30
Advertisement
Table of Contents
