Seat Msg85 - Ransomes Highway 2130 Safety, Operation & Maintenance Manual

9 ADJUSTMENTS
9.6.3 SEAT MSG85 MECHANICAL SUSPENSION
The seat can be adjusted for operator's weight and
leg reach to provide a comfortable position for
operating the machine.
A. ADJUSTMENT FOR OPERATOR WEIGHT
To Adjust:
The position of the adjusting knob (A) is on the front
of the seat, in the centre below the seat cushion. By
rotating the knob clockwise the weight capacity is
increased and by rotating the knob anticlockwise
the weight capacity is decreased.
B. FORE AND AFT ADJUSTMENT
To Adjust:
The position of the adjusting lever is on the right
hand side of the seat below the seat cushion (B). By
moving the lever towards the seat, the seat can be
slid backwards and forwards. When in the desired
position release the lever to locate in one of the pre
set positions.
C. BACK REST ADJUSTMENT
The back rest has three preset positions
To Adjust:
The position of the release lever is on the left hand
side of the seat back rest (C). Move the lever
upwards to move the upper part of the back rest
forward. Move the lever downwards to move the
upper part of the back rest rearwards.
NOTE:The seat is fitted with a microswitch to sense
operator presence. When the machine is fitted with a
ROPS frame or cab a lap belt is fitted and should be
worn at all times
en-50
RANSOMES HIGHWAY 2130
SAFETY AND OPERATORS MANUAL
A
B
C