K-Setting The Date; L-Setting Daylight Savings Time - Traulsen R & ASeries Owner's Manual

VII. k - SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instruc-
tions to enter the customer access code on page 10. When the control displays
Set Point, press the down arrow key
SET
button . The display will show
the arrow keys
SET
. The display will show
arrow keys
SET
. The display will show
arrow keys
SET
. The display will then read
keys to scroll to the next parameter, press the alarm cancel button to exit
VII. l - SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings
Time. Follow the instructions to enter the customer access code on page 10. When the control dis-
plays Thermostat Set Point, press the down arrow key
Daylight Savings Time. Press the set button
light Savings Time (Yes, automatically adjust for Daylight Savings Time).
SET
set button , for "NO" press the up or down arrow key
Daylight Savings Time (no). Press the set button
Set Point. You can press the the up or down arrow keys
or press the alarm cancel button to exit
VII. INTELA-TRAUL
until the control display reads
to set the year. When the correct year is displayed, press the set button
(month). The right two numbers will be flashing. Use the
to set the month. When the correct month is displayed, press the set button
(day). The right two numbers will be flashing. Press the
to set the day. When the correct day is displayed, press the set button
Thermostat Set Point. You can use the up or down arrow
)
)
)
(continued)
®
(year). The right two numbers will be flashing. Press
SET
. The display will show
SET . The display will read
.
-14-
Thermostat
Date. Press the set
)
)
)
.
until the display reads
For "YES," press the
. The display will read
Thermostat
to scroll to the next parameter
Day-