H-Adjusting Thermostat Set Point Low; I-Changing The Temperature Scale - Traulsen R & ASeries Owner's Manual

VII. h - ADJUSTING THE THERMOSTAT SET POINT Differential:
This parameter sets the set point differential of the desired cabinet temperature range. Typically, freezers
and refrigerators will range from 2° F to 5° F for this parameter setting. This parameter is preset at the
factory and does not have to be adjusted unless the customer chooses to do so. Set point differential
determines the cabinet temperature at which the compressor come on.
Follow the instructions to enter the customer access code on page 10. When the control
displays Thermostat Set Point, press the down arrow key
display reads
Use the arrow keys
When the display shows the temperature you want press the set button
The display will then read
You can use the up or down arrow keys to scroll to the next parameter
or press the alarm cancel button to exit
VII. i - CHANGING THE TEMPERATURE SCALE:
The temperature scale determines if the temperature displayed will be in degrees
Fahrenheit or degrees Celsius.
Follow the instructions to enter the customer access code on page 10. When the control
displays Thermostat Set Point, press the down arrow key
display reads
The display will start with the current setting either
or for degrees Celsius. Use the arrow keys
When the display shows the scale you want press the set button
The display will then read
You can use the up or down arrow keys
or press the alarm cancel button to exit
VII. INTELA-TRAUL
Thermostat Set Point Differential. Press the set button
to adjust the temperature to your desired setting.
Thermostat Set Point.
)
)
)
Temperature Scale. Press the set button
Thermostat Set Point.
)
)
)
(continued)
®
.
SET
for degrees Fahrenheit
to toggle between the options.
SET
to scroll to the next parameter
.
-12-
until the control
.
SET
SET
.
until the control
.
.