L-Setting The Date; M-Setting Daylight Savings Time - Traulsen UC Series Owner's Manual

VII. l - SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instruc-
tions to enter the customer access code on page 9. When the control displays
Set Point High, press the down arrow key
the set button . The display will show
SET
Press the arrow keys
button . The display will show
SET
the arrow keys
button . The display will show
SET
the arrow keys
. The display will then read
SET
arrow keys
VII. m - SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings
Time. Follow the instructions to enter the customer access code on page 9. When the control dis-
plays Thermostat Set Point High, press the down arrow key
Daylight Savings Time. Press the set button
light Savings Time (Yes, automatically adjust for Daylight Savings Time).
button , for "NO" press the up or down arrow key
SET
Dayligt Savings Time (no). Press the set button
Set Point High. You can press the the up or down arrow keys
eter or press the alarm cancel button to exit
VII. INTELA-TRAUL
to set the year. When the correct year is displayed, press the set
to set the month.
to set the day. When the correct day is displayed, press the set button
Thermostat Set Point High. You can use the up or down
to scroll to the next parameter, press the alarm cancel button to exit
(continued)
®
until the control display reads
(year). The right two numbers will be flashing.
(month). The right two numbers will be flashing. Use
When the correct month is displayed, press the set
(day). The right two numbers will be flashing. Press
. The display will show
SET
. The display will read
SET . The display will read
) .
)
)
-14-
Thermostat
Date. Press
)
)
)
until the display reads
Day-
For "YES" press the set
Thermostat
to scroll to the next param-
.