K-Setting The Date; L-Setting Daylight Savings Time - Traulsen TU044HT Owner's Manual

VII. k - SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instructions to enter the
service access code on page 8. When the control displays
key until the control display reads
(year). The right two numbers will be flashing. Press the arrow keys
correct year is displayed, press the set button
bers will be flashing. Use the arrow keys
SET
the set button . The display will show
keys to set the day. When the correct day is displayed, press the set button
read Date. You can use the up or down arrow keys
alarm cancel button to exit
VII. l - SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. Follow the in-
structions to enter the customer access code on page 8. When the control displays
press the down arrow key
SET
. The display will show
For "YES" press the set button
Daylight Savings Time (no). Press the set button
Time. You can press the up or down arrow keys
.
button to exit
)
)
)
VII. MICROPROCESSOR CONTROL (continued)
Date. Press the set button
SET
. The display will show
) .
)
)
until the display reads
Daylight Savings Time (Yes, automatically adjust for Daylight Savings Time).
SET
,for "NO" press the up or down arrow key
Thermostat Set Point High, press the down arrow
to set the month. When the correct month is displayed, press
(day). The right two numbers will be flashing. Press the arrow
to scroll to the next parameter, press the
Daylight Savings Time. Press the set button
SET
. The display will read
to scroll to the next parameter or press the alarm cancel
-12-
SET . The display will show
to set the year. When the
(month). The right two num-
SET
. The display will then
Thermostat Set Point High,
. The display will read
Daylight Savings