O-Adjusting The Room Temperature Offset; P-Setting The Audible Alarm Style - Traulsen R & ASeries Owner's Manual

VII. o - ADJUSTING THE ROOM TEMPERATURE OFFSET:
The room temperature offset parameter allows a service technician or end user the ability to have the
display show a temperature that is within three degrees of the actual temperature being read by the
cabinet air sensor. This allows for continuity of reading between different temperature reading devices.
(i.e.: thermistor Vs thermocouple Vs hand held thermometer) This parameter is preset at the factory to
"0" or no offset.
Follow the instructions to enter the customer access code on page 10. When the control displays
Thermostat Set Point, press the down arrow key
Room Temperature Offset. Press the set button
offset to your desired setting. When the display shows the offset you want press the set button
The display will then read
to scroll to the next parameter or press the alarm cancel button to exit
VII. p - SETTING THE AUDIBLE ALARM STYLE:
This parameter will allow the customer to turn on/off the audible alarm feature on the
INTELA-TRAUL control. The audible alarm is preset from the factory to OFF. The customer can
®
choose between an audible alarm that sounds for 3 seconds then automatically turns off, or a
continuous audible alarm that must be manually acknowledged. Regardless of this feature's setting,
visual alarm text will display when conditions warrant.
To adjust this setting, follow the instructions to enter the customer access code on page 10. When
the control displays
reads Audible Alarm Style. Press the set button
Use the arrow keys
or for Continuous Audible Alarm. When the display shows your choice of style, press the set
SET
button . The display will then read
to scroll to the next parameter or press the Alarm Cancel Button
VII. INTELA-TRAUL
SET
Thermostat Set Point. You can use the up or down arrow keys
Thermostat Set Point, press the up arrow key
to scroll between
thermostat Set Point. Use the arrow keys
-17-
(continued)
®
until the control display reads
. Use the arrow keys
SET
. The display will read
for the 3-Second Audible Alarm Burst
)
)
)
to adjust the
)
) .
)
until the display
OFF.
to exit.
SET
.