F-Customer Service Parameters; G-Adjusting Thermostat Set Point - Traulsen R & ASeries Owner's Manual

VII. f - CUSTOMER SERVICE PARAMETERS:
Listed below are the available parameters in the order they appear, using the down arrow key on the
controller. You can use either the up or down arrow keys to scroll through the options.
Thermostat Set Point
Set Point Differential
Temperature Scale*
Audible Alarm Style*
Time (24-hour clock)*
Date (month - day - year)*
Daylight Savings *
Defrost Lockout 1
Cabinet Air Sensor Temp
VII. g - ADJUSTING THE THERMOSTAT SET POINT:
This parameter sets the low point of the desired cabinet temperature range. Typically, freezers will range
from -4° F to 0° F (-19° C to -18° C) and refrigerators will range from 36° F to 40° F (2° C to 4° C) for
this parameter setting. This parameter is preset at the factory and does not have to be adjusted unless
the customer chooses to do so.
Follow the instructions to enter the customer access code on page 10. When the control
display reads
Use the arrow keys
When the display shows the temperature you want press the set button
The display will then read
You can use the up or down arrow keys to scroll to the next parameter
or press the alarm cancel button to exit
VII. INTELA-TRAUL
Thermostat Set Point. Press the set button
to adjust the temperature to your desired setting.
Thermostat Set Point.
)
)
)
(continued)
®
Defrost Lockout 2
Defrost Lockout 3
Defrost Lockout 4
Dew Point Compensation Factor*
Room Temperature Offset
Evaporator Coil Sensor
Discharge Line Sensor
Start Manual Defrost
*Available on Hot Food units.
.
-11-
.
SET
SET
.