Nxa-Mtc/Rgb Combo Table Top Cable (Ca2250-70); Product Specifications - AMX NXD-1700VG Instruction Manual

10. Verify a proper installation of all of the RJ-45, HD-15, and power connectors between the rear of the breakout box and the
computer.
11. Provide power to both the computer and the NXA-AVB/RGB Breakout Box.

NXA-MTC/RGB Combo Table Top Cable (CA2250-70)

The VG-Series of Modero Touch Panels (fitted with either an RGB Kit (Video/RGB) or upgraded with an optional NXA-RGBKIT
(FG2255-11)) are shipped with a 10' (3.048 m) NXA-MTC/RGB Modero cable (CA2250-70) that supports both RGB, Ethernet,
Audio/Video, and Power connections. This cable (FIG. 8) comes terminated with three RJ45 connectors (Ethernet/AV/RGB) and a
single 2-pin 3.5 mm mini-Phoenix connector (for power).
10 Foot NXA-MTC/RGB Combo Table Top Cable
FIG. 8
Product Specif ications
NXA-MTC/RGB Specif ications
Dimensions (HWD):
Connectors:
Included Accessories:
Other AMX Equipment:
Other AMX Equipment:
Modero VG Series Touch Panels - Instruction Manual
• Length: 10 feet (3.048 m)
• Ethernet RJ-45 connector (White) routes Ethernet signals between the touch panel and the AVB/RGB
Breakout Box.
• Audio/Video RJ-45 connector (Black) routes differential audio/video signals between the touch panel
and the box.
• RGB RJ-45 connector (Blue) routes RGB/Component video signals and touch control information to
the RJ-45 RGB connector on the NXA-RGB card (installed within the panel). This connector routes
VGA and Component video signals between the panel and the AVB/RGB Breakout Box.
• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external breakout box to the
target panel.
• One NXA-MTC/RGB Combo Table Top Cable (CA2250-70)
• One black tie wrap (used to join the Ethernet and Power cables)
Note: All 1200V, VG-Series, and CV10 Table Top panels routing an Audio/Video signal from a breakout box
must use the appropriate number of CAT5 Suppression Ferrites which are included as part of installation
kits accompanying your particular Modero panel.
Each of the following Installation Kits come with the appropriate number of CAT5 Suppression Ferrites.
These Ferrites must be installed onto their appropriate locations.
• Installation Kit for 12" and 17" NXD panels (KA2251-01):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
- One CAT5 Suppression Ferrites (04-0014)
- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
• Installation Kit for 15" NXD panels (KA2251-02):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
- Two CAT5 Suppression Ferrites (04-0014)
- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
• Installation Kit for 15" NXD panels (KA2251-02):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
- Two CAT5 Suppression Ferrites (04-0014)
- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
• Installation Kit for 12" NXT panels (KA2251-03):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
- Two CAT5 Suppression Ferrites (04-0014)
• Installation Kit for 15" and 17" NXT panels (KA2251-04):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
- One CAT5 Suppression Ferrites (04-0014)
• Installation Kit for 10" NXT panels (KA2259-01):
- 2-pin 3.5 mm mini-Phoenix connector (41-5025)
- One CAT5 Table Top Suppression Ferrite (04-0014)
- One cylindrical CAT5 USB Mouse Suppression Ferrite (04-0018-SA)
Touch Panel Accessories
27