Protected Setup Navigation Buttons - AMX NXD-1700VG Instruction Manual

Protected Setup Navigation Buttons

The Protected Setup Navigation Buttons (FIG. 114) appear on the left of the panel screen when the Protected Setup page is
currently active.
Modero Protected
Setup Navigation
Protected Setup Navigation Buttons
FIG. 114
These Navigation Buttons are specific to these Modero panels and include the panel specific elements described in the following
table:
Protected Setup Navigation Button Elements
System Settings:
Sensors:
Calibrate:
G4 Web Control:
Other Settings:
Tools:
Wireless Settings:
Modero VG Series Touch Panels - Instruction Manual
Buttons
Press the System Settings button to access the System Settings page, where you can alter the communication
parameters of both the NetLinx Master and Modero panel.
• Refer to the System Settings Page section on page 119 for more detailed information.
Press the Sensors button to access the Sensor Settings page, where you can modify/monitor both the light and
motion sensor settings.
• Refer to the Sensor Settings Page section on page 120 for more detailed information.
Press the Calibrate button to access the Calibration page, where you can use the displayed set of crosshairs to
calibrate a touch panel.
• Refer to the Calibration Page section on page 122 for more detailed information.
Press the G4 Web Control button to access the G4 Web Control Settings page, where you can enable or disable
display and control of your panel (via the web) by a PC running a VNC client. Refer to the G4 Web Control
Settings section on page 122 for more information on this page.
• Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 88 for more detailed information on
how to use this feature.
Press the Other Settings button to access the slideout menu for the Cache and Passwords buttons:
• Press the Cache button to access the Cache Settings page, where you may change the image cache settings or
view the image cache status. Refer to the Cache Settings Page section on page 124 for more detailed information.
• Press the Passwords button to access the Password Settings page, where you can specify up to five security
passwords. Default password is 1988. Refer to the Password Settings Page section on page 126 for more detailed
information.
Press the Tools button to access the slideout menu for the Panel Logs, Panel Statistics, and Connection Utility
buttons:
• Press the Panel Logs button to open the Panel Connection Logs page (page 126)
• Press the Panel Statistics button to open the Panel Statistics page (page 127),
• Press the Connection Utility button to open the Connection Utility popup window (page 128).
Press the Wireless Settings button to access the Wireless Settings page where you can setup the wireless connection
parameters used by the optional
NXA-PCI80211G wireless card. Refer to the Wireless Settings Page section on page 129 for more detailed
information.
Firmware Pages and Descriptions
116