Video - Streaming Settings Page - AMX NXD-1700VG Instruction Manual

Good
RGB signal
overlap
Full Screen Edit Mode - showing skew adjustment scenario
FIG. 111
10. Once done making these adjustments, press the Done button to temporarily save these modifications and place the grey RGB
Adjustments bar back onto the bottom of the screen. Pressing the Cancel button returns you to the RGB Settings page
without temporarily saving your changes.
11. Press anywhere on the background image to exit from the Full Screen Edit mode and return to the RGB Settings page.
12. In the RGB Settings Page, press the Save Settings button to save your changes to the NXA-RGB card. Cycling power to the
panel before saving your settings can cause your pages to shift back to their original locations.
13. Press the Back button to return to the Setup page.

Video - Streaming Settings Page

The Streaming Settings page (FIG. 108) adjusts the Video properties of the incoming MPEG video streaming from the external
content server. Refer to the Displaying Stream Content section on page 133 for the procedures used to configure the TPD4 touch
panel pages and media stream source (using MAX-CSE for example purposes).
Streaming Video Adjustment page (showing default values)
FIG. 112
The elements of the Streaming Settings page are described in the table below:
Streaming Settings Page Elements
Back:
Connection Status icon:
Settings:
Video Settings:
Modero VG Series Touch Panels - Instruction Manual
A
Saves the changes and returns you to the previously active touch panel page.
This visual display of the connection status allows the user to have a current visual update of the panel's
connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently secured target
Master (requiring a username and password).
• The Default Settings button sets the streaming video settings to their default values (indicated in this table).
• The Undo Changes button disregards any changes made on the page since the last settings were saved.
• The Save Settings button saves any changes made to the Video Setup page.
• The Sharpness button toggles the Interpolate (Sharpness) feature. Default = On.
• The Interlace button toggles the Interlacing feature. Default = On.
Firmware Pages and Descriptions
B
Green and Blue signal
in sync but Red signal is
not properly synched-up
Incoming Streaming Video signal
112