Nxa-Mtc/Rgb Combo Table Top Cable (Ca2250-70); Product Specifications - AMX Modero NXT-1500VG Operation/Reference Manual

Modero vg-series g4 touch panels
Hide thumbs Also See for Modero NXT-1500VG:
Table of Contents

Advertisement

Touch Panel Accessories

NXA-MTC/RGB Combo Table Top Cable (CA2250-70)

The VG-Series of Modero Touch Panels (fitted with either an RGB Kit (Video/RGB) or upgraded with
an optional NXA-RGBKIT (FG2255-11)) are shipped with a 10' (3.048 m) NXA-MTC/RGB Modero
cable (CA2250-70) that supports both RGB, Ethernet, Audio/Video, and Power connections. This cable
(FIG. 8) comes terminated with three RJ45 connectors (Ethernet/AV/RGB) and a single 2-pin 3.5 mm
mini-Phoenix connector (for power).
FIG. 8
10 Foot NXA-MTC/RGB Combo Table Top Cable

Product Specifications

NXA-MTC/RGB Specifications
Dimensions (HWD):
Connectors:
Included Accessories:
Other AMX Equipment:
28
• Length: 10 feet (3.048 m)
• Ethernet RJ-45 connector (White) routes Ethernet signals between the touch
panel and the AVB/RGB Breakout Box.
• Audio/Video RJ-45 connector (Black) routes differential audio/video signals
between the touch panel and the box.
• RGB RJ-45 connector (Blue) routes RGB/Component video signals and
touch control information to the RJ-45 RGB connector on the NXA-RGB card
(installed within the panel). This connector routes VGA and Component
video signals between the panel and the AVB/RGB Breakout Box.
• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external
breakout box to the target panel.
• One NXA-MTC/RGB Combo Table Top Cable (CA2250-70)
• One black tie wrap (used to join the Ethernet and Power cables)
Note: All 1200V, VG-Series, and CV10 Table Top panels routing an
Audio/Video signal from a breakout box must use the appropriate number of
CAT5 Suppression Ferrites which are included as part of installation kits
accompanying your particular Modero panel.
Each of the following Installation Kits come with the appropriate number of
CAT5 Suppression Ferrites.
These ferrites must be installed onto their appropriate locations.
• Installation Kit for 12" and 17" NXD panels (KA2251-01):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
- One CAT5 Suppression Ferrites (04-0014)
- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
• Installation Kit for 15" NXD panels (KA2251-02):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
- Two CAT5 Suppression Ferrites (04-0014)
- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
VG-Series Modero Touch Panels

Advertisement

Table of Contents
loading

Table of Contents