Table of Contents
Advertisement
9
Knob
10
11
12
Spittoon case
13
Spittoon unit
Close the capping cover and then close the front cover.
14
74
IP-7900/IP-7700 Basic Operation Guide
Press the knob at the near side of the case containing
Discharge
the spittoon absorber liquid to open the lid, raise
the front side of the spittoon absorber liquid case to
discharge the spittoon absorber liquid to the backside.
The discharged spittoon absorber liquid will go into
the waste ink bottle.
When discharge is completed, put the spittoon
absorber liquid case back into the original position.
- Be sure to wear gloves when performing this operation.
Hold the finger grip at the spittoon case's both
side.
Then remove the spittoon case by lifting
upward.
Spittoon case
Set a new spittoon case's locating hole to the
protrusion, and fix it horizontally by pressing
slightly.
Moisten the spittoon case with the spittoon
Dropper
absorber liquid using a dropper.
Confirm that the spittoon absorber liquid's top
surface is as high as the top of the protrusions.
Liquid level
- In the spittoon case, the spittoon absorber liquid is
Top of the
protrusions
CAUTION
CAUTION
absorbed by the sponge, which may lower the liquid's
top surface.
In such a case apply the liquid additionally.
Advertisement
Table of Contents
